- Unit Type: piece
- Package Weight: 0.2kg (0.44lb.)
- Package Size: 10cm x 9cm x 8cm (3.94in x 3.54in x 3.15in)
Cheap welding torch nozzle, Buy Quality welde beer directly from China nozzle diesel Suppliers: Free Shipping 5mm round welding nozzle & 5mm round speed nozzle & tacking nozzle for platic welders,hot air gun,heat gun kit
package include:
1x5mm turbular nozzle
1x5mm round speed nozzle
1xtacking nozzle
total 3pcs show as picutre
Instruction specifications:
Hot-Air Welding is used for polypropylene, polythene, PVC and polycarbonate.
The welding rod must be of the same material.
Ensure that the speed welding nozzle is clean with sharpcutting edges.
The parts to be welded must be supported in place and blocked to ensure air cannot escape through the seam.
The welding nozzle should be held so that the air slot is parallel with the seam to be welded. At the end of the weld,
the rod is cut with the cutting edge by means of a twist of the wrist. The shoe at the end of the nozzle should force
the softened welding rod into place. (fig 9)
To weld slowly, set the heat to a lower setting.
To finish off an awkward or unsightly weld, the excess material can be cut away with a stanley knife, ground away with
a file or tooled using the gun and a cold screwdriver or chisel.
Speed Welding
The use of speed welding ti