1 Set CNC Router Engraving Machine Tool Touch Plate Probe Mach3 Router Milling Tools

• Unit Type: Set
• Package Weight: 0.09kg (0.20lb.)
• Package Size: 15cm x 10cm x 8cm (5.91in x 3.94in x 3.15in)

Cheap tool nail, Buy Quality tools for laptop repair directly from China tool caddie Suppliers: 1 Set CNC Router Engraving Machine Tool Touch Plate Probe Mach3 Router Milling Tools

1 Set CNC Router Engraving Machine Tool Touch Plate Probe Mach3 Router Milling Tools
Features
100% quality and Brand new
Connect the wire of this tool check instrument to the tool connector of your Control board of the machine , then the control board\'s GND connect to the frame of your router ( the frame of the router and the spindle must have connections)
two ways to connect this item:
1. If your interface board has the limit switch port or other probe port, you can connect it to that port
2. If your interface board does not have that port, your driver board has that port,you can connect it to the driver board\'s limit switch port
 
Then in the Mach 3,you need to setup the probe(Mach3 --- Config---Ports and Pins---Input signals Probe enabled,the pin number type the one you use) and the Auto-Tool-Zero. in the attachment, it is the code,you can edit it as your requirements
 
 
Specification
Diameter:35mm
Thickness:19.5-20mm(Please Fill in the actual thickness)
Effective surface diameter:25mm
Cable length:1.2 M
Diameter: 0.2 square feet
Black base:orga