1x 17mm*20M*0.15mm RP Thermal Transfer Fiber Glass 2 Sides Sticky Tape for LED Module, Thermal Pads, PCB Heat Sink Cool Bond

• Unit Type: piece
• Package Weight: 0.3kg (0.66lb.)
• Package Size: 18cm x 18cm x 5cm (7.09in x 7.09in x 1.97in)

Cheap glass tabletop, Buy Quality glass drill bit prices directly from China glass patio Suppliers: 1x 17mm*20M*0.15mm RP Thermal Transfer Fiber Glass 2 Sides Sticky Tape for LED Module, Thermal Pads, PCB Heat Sink Cool Bond

17mm*25M*0.15 Double Sided  Thermally Conductive Adhesive  Tapes for Chip, Soft PCB, LED,  Heat Transfer
 
Size: 17 mm*20m*0.15mm
Mateial of backness: glass fiber
Red film thickness: around 0.08mm
Adhesive thickness: around 0.25mm
Total Thickness: around 0.25mm+/-10%
Peel Strength 180 degree (PSTC-101 ): >13.72
Long-term Temperature Resistant (C/F): 120 / 248
Short-term Temperature Resistant (C/F): 180/ 356
Retentivity (PSTC-7)(HOUR)(1KG/INCH/25C): >48
Adhesive Strength(KG/INCH): 1.3
Voltage Withstand(kv): 4
Thermal Conductivity (ASTM D22470) (W/m-k): 1.0
Temperature: 4-20C~+120C
 
Usage:
widely using for adhesive of chips, soft PCB, high power transistor, thermal pads or other cooling equipment, such as
* transistor with heatsink;
* DC/DC circuit board case;
* soft pcb and heatsink;
* heatsink with processor
 
Feature:
made of leading pressure sensitive adhesive, with good strength and adhesion and providing excellent way of thermal conductive
 
Remark:
*  we can cut as your request width.
* Picture just f