- Unit Type: piece
- Package Weight: 0.5kg (1.10lb.)
- Package Size: 10cm x 11cm x 12cm (3.94in x 4.33in x 4.72in)
Cheap tester, Buy Quality tester meter Directly from China Suppliers:N1201SA+ NFC RFID Antenna Analyzer RF Vector Impedance Tester Meter 35MHz to 2.7GHz
N1201SA+ NFC RFID Antenna Analyzer RF Vector Impedance Tester Meter 35MHz to 2.7GHz
Decription:
- English version
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
- The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown
- Hold down the CTRL key off press the power switch button.
- The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
- The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Some suggestions:
- In order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
- Try to use good quality RF cable and connectors.
- Calibrated cable mark