- Unit Type: Set
- Package Weight: 0.1kg (0.22lb.)
- Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Cheap transmitter and receiver wireless, Buy Quality transmitter circuit directly from China transmitter uhf Suppliers: LED Strips Door Lock Remote Control Switch System Relay Receiver NO COM NC Contact RX + Wall Sticky Panel Remote Transmitter
DC12V 1CH Receiver Board
1.Working Voltage: DC12V more or less than 10%
2.Current:Standby≤10mA,Working ≤128mA
3.Working Temperature: -10\'C—+60\'C
4.Receiver Frequency: 315MHz
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value
7.Max Load:10A Relay, Resistive load≤8A,Inductive load≤3A
8.Receiver Board Size:55×31×16mm
9.Case Size:73×36×24mm
Learning Code: Add transmitter by the Learning Button on the receiver
Output State: It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed)
Momentary----------Jumper on “1&2”
Toggle----------------Jumper “2&3”
Latched--------------Take away the Jumper or put the Jumper on 1 Pin
Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF,
Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF,
Latched--------------