3 Axis Nema 42 Wantai Stepper Motor 4200oz-in, 8A CNC & 220VDC Driver Mill Control

$1 345.00

0 Review(s)

0.00

In stock

Fast shipping

Shop:

Holding Torque: 30N.cm
Type: Hybrid
Phase: 2
Current / Phase: 8.0A
Certification: CE,ISO,ROHS
Step Angle(degrees): 1.8°
Model Number: 110BYGH201-001
Place of Origin: Jiangsu, China (Mainland)

Description

Unit Type: piece
Package Weight: 40.0kg (88.18lb.)
Package Size: 60cm x 70cm x 50cm (23.62in x 27.56in x 19.69in)

Cheap control f4, Buy Quality motor control driver directly from China motor control circuit diagram Suppliers: High Quality 3 Axis Nema 42 Wantai Stepper Motor 4200oz-in, 8A CNC & 220VDC Driver Mill Control

Product Description

This item includes:

             3PCS Nema 42 Stepper Motor with 4200oz-in holding torque,
             3 PCS Stepper Driver with 110-220VAC,7.0A, 300 Microstep,
             1 PC DB25 Breakout Board & 1 Cable for free offering

1, stepper motor
Technical Specifications

Part No.:                          WT110STH201-001
Frame Size:                     NEMA42
Step Angle:                    1.8 degree
Voltage:                           5.36VDC
Current:                          8.0 A/phase
Resistance:                     0.67Ohm/phase
Inductance:                     12mH/phase
Holding torque:               300 Kg-cm       4200oz-in
Rotor inertia:                  1620 g-cm2
Number of wire leads:   4
Weight:                            11.7kgs
Length:                           201 mm
Shaft Diameter:              19mm


2, Stepper Motor Driver

DQ2722M, 110-220VAC, 7.0A, 300 Microstep,

The DQ2722M is full digital 2 phase stepper driver based

NEMA 34 Closed Loop Stepper Motor 4.5Nm 5A 642Oz-in Hybrid Stepping Motor Nema34 Close Loop Motor driver DC(40-110V)/AC(60-80V)

$135.80

(0)

1pcs x Nema34 4.5Nm 86mm Closed Loop Stepper Motor 1pcs x Motor Driver 2HSS86H Nema34 86X80mm Closed Loop Stepper Motor General Specification: Phase: 2Step Angle: 1.8 degCurrent: 5AResistence...

4Axis Cnc Nema17 Wantai stepper motor 4000g.cm & 1.7A,12-36VDC,128 Mill driver

$102.00

(0)

This Item includes: 4 PCS Nema 17 with 4000g.cm,1.7A current,4-Leads , 40mm body length , 5mm shaft diameter ,2 phase 4 PCS DQ420MA with 1.7A peak current ,12-36VDC, 128 Microstep 1 PC...

Nema17 42 stepper motor stepper motor planetary reducer planet reducer + high engine torque deceleration ratio of 1: 5. 18 M1501

$31.69

(0)

Descriptions: Size: NEMA 17 42 * 42 * 62 mm Torque: 3n. m An output shaft: d shape, diameter = 8 m Ratio 5: 1 â€‹ Payment ...

CNC mach3 USB 3 Axis Kit, 3pcs TB6560 driver+ mach3 USB stepper motor controller board+ 3pcs nema17 stepper motor +power supply

$112.50

(0)

Package Includes 1 x 24V/10A switching power supply 3 x 1 Axis TB6560 stepper motor driver 3 x 42HS48 stepper motor 1 x mach3 USB stepper motor controller ...

7.5:1 NEMA34 Gearbox Stepper Motor 114 mm Motor Length 8.2 N.m 1139 oz-in

$110.78

(0)

7.5:1 NEMA34 Gearbox Stepper Motor 114 mm Motor Length 8.2 N.m 1139 oz-in There are also gear ratio 3:1, 5:1, 10:1, 15:1, 20:1 for Selection. Leave message about the gear ratio you need. Mo...

4 Axis CNC Kit 13Nm/1841oz.in Nema 34 Stepper Motor & Driver CNC Mill Router Lathe Robot

$585.00

(0)

Package including: 4 x MA860H Stepper Motor Driver Max 80VAC or 110VDC with 2.4-7.2A 4 x High Torque/Speed Nema 34 CNC Stepp...

57mm Planetary Gearbox Geared Stepper Motor Ratio 50:1 NEMA23 L 56MM 3A

$92.00

(0)

57mm Planetary Gearbox Geared Stepper Motor Ratio 50:1 NEMA23 L 56MM 3AShaft:14mm keywayGearbox thickness:70mmMotor Body:56mmWiring: black line=A+, green line=A-, red=B+, blue line=B- Stepper motor driver...

57 stepper motor motor with large torque 2.5NM + supporting stepping motor driver DQ542MA

$96.99

(0)

Motor Specification: DQ542MA type subdivision two-phase hybrid stepping motor driver using DC 18 ~ 50V power supply for driving voltage 18V ~ 50V current less than 4.0A diameter 42 ~ 86 mm two-phase hybr...