220V 2CH wireless switch system Radio Wireless Receiver with Buzzer&Transmitter Learning Code Toggle Momentary Latched adjusted

• Unit Type: Set
• Package Weight: 0.2kg (0.44lb.)
• Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)

Cheap switch led, Buy Quality receiver futaba directly from China receiver audio Suppliers: 220V 2CH wireless switch system Radio Wireless Receiver with Buzzer&Transmitter Learning Code Toggle Momentary Latched adjusted

 
220V 10A 2CH wireless remote control system .(2 transmitters & 1 receiver )
 
 AC220V  1CH Receiver +2 Transmitter(20-200m)
 
1 Relay 1 Transmitter independently
 
 
1.Working Voltage: AC220V-+10%
2.Max Current : 10A (have better lower than 7A )
3.Channel: 1CH
4.Working Frequency : 315/433.92MHZ Optional
Receiver sensitivity: : -105Db
Working temperature : -10\'C - +60\'C
Output way : Momentary. Toggle .Latched  adjusted by Jumper
Code type: Learning code Add Controller by the Learning Button on the receiver
Output State:
It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed)
 
 
A: Momentary-----------Put the Jumper on “M&G”.
B: Toggle------------put the Jumper on “T&G”
C: Latched------------- Take way the Jumper or put the Jumper on any 1 Pin.
 
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,
Toggle---------