DC24V 1CH Access Control System 3 Transmitter 1 Receiver Remote Control Switch System Learning Code Latched A ON B OFF

• Unit Type: Set
• Package Weight: 0.2kg (0.44lb.)
• Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)

Cheap switch dim, Buy Quality switch pen directly from China code organizer Suppliers: DC24V 1CH Access Control System 3 Transmitter 1 Receiver Remote Control Switch System Learning Code Latched A ON B OFF

 
DC24V 1CH Receiver Board
1.Working Voltage: DC24V more or less than 10%
2.Current:Standby≤10mA,Working ≤128mA
3.Working Temperature: -10\'C—+60\'C
4.Receiver Frequency: 315MHz/433MHZ
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value
7.Max Load:10A Relay, Resistive load≤8A,Inductive load≤3A
8.Receiver Board Size:50×34×16mm      Case Size:63×38×22mm
9.Power LED    Relay LED     Learning LED
Learning Code: Add transmitter by the Learning Button on the receiver
 
Output State:     It is adjusted by the Jumper on the Receiver Board, (before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed)
Momentary----------Jumper on “M & Mid Pin”
Toggle----------------Jumper “T& Mid Pin”
Latched--------------Take away the Jumper or put the Jumper on 1 Pin
Momentary------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF,
Toggle---------------Press transmitter button for 1 time, the receiver relay is ON, pres