High powerful CNC Mill Nema23 Wantai Stepper Motor 287OZ-In .1.0A ,57BYGH603 & Driver DQ542MA Control Kit New

$80.00

0 Review(s)

0.00

In stock

Fast shipping

Shop:

Certification: ROHS,CE,ISO
Type: Hybrid
Phase: 2
Model Number: 57BYGH603
Current / Phase: 1A
Step Angle(degrees): 1.8
Holding Torque: 287oz-in
length: 78mm
Place of Origin: Jiangsu, China (Mainland)

Description

Unit Type: piece
Package Weight: 3.5kg (7.72lb.)
Package Size: 25cm x 20cm x 20cm (9.84in x 7.87in x 7.87in)

Cheap nema23 stepper motor, Buy Quality stepper motor directly from China nema23 stepper Suppliers: High powerful CNC Mill Nema23 Wantai Stepper Motor 287OZ-In .1.0A ,57BYGH603 & Driver DQ542MA Control Kit New

This Item includes:

2 PCS Nema 23 Stepper Motor with 287oz-in ,2 Phase,6 Wires,

2 PCS Stepper Driver DQ542MA with 4.2A peak current ,24-50VDC,128 microstep.

1, Stepper Motor

Technical Specifications

Part No.:                          57BYGH603
Frame Size:                  NEMA23
Step Angle:                    1.8 degree
Voltage:                          8.6V
Current:                          1.0 A/phase
Resistance:                   8.6Ohm/phase
Inductance:                   18mH/phase
Holding torque:            14.5Kg-cm    287oz-in (For Bipolar connecting, the holding torque is 287oz-in)
Rotor inertia:                 480 g-cm2
Detent torque:             0.68 kg-cm
Number of wire leads:  6
Weight:                          2.20lb (1.0 kg)
Length:                            78mm
Shaft diameter:               1/4\'\'(6.35mm)

2, Stepper Driver DQ542MA

Introduction

The DQ542MA is an economical microstepping driver based on patented technology of Wantai Motor.I

CNC mach3 USB 3 Axis Kit, 3pcs TB6560 driver+ mach3 USB stepper motor controller board+ 3pcs nema17 stepper motor +power supply

$112.50

(0)

Package Includes 1 x 24V/10A switching power supply 3 x 1 Axis TB6560 stepper motor driver 3 x 42HS48 stepper motor 1 x mach3 USB stepper motor controller ...

7.5:1 NEMA34 Gearbox Stepper Motor 114 mm Motor Length 8.2 N.m 1139 oz-in

$110.78

(0)

7.5:1 NEMA34 Gearbox Stepper Motor 114 mm Motor Length 8.2 N.m 1139 oz-in There are also gear ratio 3:1, 5:1, 10:1, 15:1, 20:1 for Selection. Leave message about the gear ratio you need. Mo...

57mm Planetary Gearbox Geared Stepper Motor Ratio 50:1 NEMA23 L 56MM 3A

$92.00

(0)

57mm Planetary Gearbox Geared Stepper Motor Ratio 50:1 NEMA23 L 56MM 3AShaft:14mm keywayGearbox thickness:70mmMotor Body:56mmWiring: black line=A+, green line=A-, red=B+, blue line=B- Stepper motor driver...

57mm Planetary Gearbox Geared Stepper Motor Ratio 10:1 NEMA23 L 112mm 4.2A

$97.00

(2)

57mm Planetary Gearbox Geared Stepper Motor Ratio 10:1 NEMA23 L 112mm 4.2A Shaft:14mm keywayGearbox thickness:53mmMotor Body:112mmWiring: black line=A+, green line=A-, red=B+, blue line=B- Stepper motor...

3 Axis Nema34 1700oz.in 12Nm Stepper Motor Drive Kit + Power Supply + 5 Axis Breakout Board CNC Kit for Engraver Lathe Mill

$494.00

(2)

USD 80.50 /pack3 Axis CNC kits 3pcs 86mm NEMA34 12NM 1700 Oz.in steper motor + 256 Microstep Drive + 3pcs 400w Power supply + 1pc 5 Axis Breakout Board + D...

3Axis CNC 1600OZ-IN & 4200OZ Spindle Stepper Motor CNC Engraving, Cutting & 220VDC Driver Mill Control

$888.00

(0)

This item includes: 2 PCS Nema 34 Stepper Motor with Single shaft 1600oz-in holding torque, 1 PC Nema 42 Stepper Motor with Single shaft 4200oz-in Holding torque, 2 PCS Stepper Drive...

3 Axis Nema 34 Spindle Dual Shaft 1090oz-in Wantai Stepper motor & Nema23 with 425oz-in CNC Foam Nill Engraving Cut

$538.99

(0)

This item includes: 2PCS Nema 34 Stepper Motor with 1090oz-in holding torque with single shaft, 2 PCS Stepper Driver with 8.2A, 1 PC Nema 23 Stepper Motor with 425oz-in,...

50N.m stepper motor / NEMA 52 stepper motor / High torque stepper motor

$800.00

(0)

50N.m stepper motor / NEMA 52 stepper motor / High torque stepper motor1. high quality ,fast delivery ,with CE,ROHS2. accept customer\'s customizatio Applications: Used for robots stepper m...