Cheap controller control, Buy Quality display module directly from China display oled Suppliers: DFRobot Genuine 0.96" Inch OLED Display/Screen Module, 1.6~3.6V SSD1306 controller extremely wide viewing angle For Raspberry Pi
DFRobot 100% Genuine 0.96" Inch OLED Display/Screen Module, 1.6~3.6V SSD1306 controller extremely wide viewing angle For Raspberry Pi Introduction Sometimes your Pi projects require a display to output system information, e.g. system status, temperature, IP address, etc. Having a full sized display attached is inconvenient if you want your project to be portable. Use this small OLED to output your required information and keep your product in a nice portable configuration. The display is a 0.96" 128 x 64 px OLED. The controller is a SSD1306 and communicates via 4-wire SPI. The display also includes a built in backlight and is high contrast with an extremely wide viewing angle. Photos Applications For Raspberry Pi Specification Operating Voltage: 3.3V (1.6~3.6V) Continuous Current: 12.25uA Maximum Current: 100uA Ultra low power supply Internal DC/DC voltage converter SPI driver support , AT 64MHz[TYP] 125MHZ[OB] FP frequency: 64fps[TYP] 368fps[OB] Dimension: 370*300mm/14.6*11.8 inches